RGBW CABLE with plug 5X0.35MM²

RGBW cable 5x0.35mm² + 1 meter - black

This cable is ideal for our 4in1 RGBW LED strips. All color lines (RGB and white) have a diameter of 0.35mm². 1.0mm² is available for the common voltage supply (common plus). This cable has a PVC sheath and is therefore more flexible than the halogen-free version.

Scope of delivery: RGBW cable - length according to your quantity specification

This cable is designed for 83045S and 83058.

Please note

It can be difficult to solder the common plus wire with a cross-section of 1.0 mm² to the solder pads of the LED strip, some of which are quite narrow. There are 2 solutions here:

1. after you have stripped the 1.0mm² wire, cut off about half of the individual copper wires at this end again. The wire section, now significantly reduced in cross-section, is much easier to solder to the LED strip.

2. take a short piece (10cm) of cable with a smaller cross-section, e.g. 0.5mm². Solder this to the LED strip and then connect it to the 1.0mm² positive wire of the RGBW cable. You can use a WAGO terminal for the connection or lead both cables into a wire end ferrule, crimp them and slide a shrink sleeve over them (beforehand!) for insulation.

Max. Current load: 10A total, 3.5A per channel

Temperature range: -5° to +70°C 

Outer diameter: 7mm

PVC sheathing